Posted on 12/31/15, 4:31 PM

Altoids Tin Filters for UHF and Microwaves
Posted by Tom - KV2X

The goal is a filter with good performance with minimal cost that can be built in a couple of hours with modest tools. See http://www.w1ghz.org/filter/Altoids_Tin_Filters.pdf

Posted on 01/03/16, 9:04 PM

Re: Altoids Tin Filters for UHF and Microwaves
Posted by Jarred - KF2MR

Interesting design. The implication is that it is to cut down on out of band spurs in the transmitted signal. My biggest need is for 902-903 MHz on receive. The design shown will probably still let through most of the offending signals, but it might be a good project to try anyway.

Post a reply to this discussion:

Message:
Name:
Are you human? 5 + 3 =